OBJECTIVES: To carry out geometry cleanup on the given 3 models. Extract the midsurface. Clean midsurface geometry. Fill holes of dia less than 5mm. Create 2D mesh with target length 5mm, min 3.5mm max 7mm. Assign proper thickness. GEOMETRY CLEANUP: The models for which the geometry cleanup is to be done has been shown…

OBJECTIVES: 1. Check the material properties of the rail component and calculate the speed of sound in steel rail. 2. The length of the rail is about 1000 mm. calculate the time takes for a shock wave to travel from one end of the rail to the other. 3.Time for sound to travel the length of the rail. 4.Edit the engine file…

OBJECTIVE: To compare the results of the base case simulation and improved shell element properties case simulation.   CASE 1: Base Simulation Procedure: The rail file from the prevous assignment has to be imported to hypermesh. The elements view is set to shaded elems view which displays the elements as follows.…

AIM: To compare the results of the different material laws (i.e. Law2, Law27 and Law36) and their properties. OBJECTIVES: To assign different material laws and properties to the given component and to compare their results and present the inference. PROCEDURE: CASE 1: Go to FILE > IMPORT > SOLVER DECK > FAILURE_JOHNSON_0000.RAD…